How To Install And Setup Your ExLock System Securing your space requires reliable hardware and a smooth installation process. The ExLock system offers advanced security features with a straightforward setup. Follow this comprehensive guide to mount, configure, and activate your new smart lock system efficiently. Pre-Installation Checklist
Before starting, gather your tools and verify your door compatibility.
Required Tools: Phillips screwdriver, tape measure, and four AA premium batteries.
Door Thickness: Standard 1-⁄8 inches to 2 inches (35mm to 50mm).
Backset Measurement: Confirm your deadbolt hole is either 2-⁄8 inches or 2-⁄4 inches.
Check Components: Ensure you have the exterior keypad, interior assembly, mounting plate, latch, and strike plate. Step 1: Install the Latch and Strike Plate
The latch must be properly oriented for the deadbolt to secure smoothly.
Adjust Latch Length: Twist the latch body if you need to extend it to match a 2-⁄4 inch backset.
Position the Latch: Insert the latch into the door hole. The word “TOP” must face upward.
Secure with Screws: Fasten the latch to the door edge using the provided wood screws. Do not overtighten.
Mount Strike Plate: Screw the strike plate into the door frame jamb. Ensure the alignment matches the latch exactly. Step 2: Mount the Exterior Keypad and Interior Plate Proper cable routing prevents wire damage during use.
Route the Cable: Feed the power cable under the deadbolt latch through the center hole.
Align Keypad: Push the exterior keypad flush against the outside of the door. Keep the tailpiece horizontal.
Position Mounting Plate: Hold the interior plate against the inside door face.
Pass Cable Through: Pull the data cable through the designated rectangular slot in the plate.
Secure the Plate: Insert the long machine screws through the plate into the exterior keypad. Tighten firmly. Step 3: Connect and Attach the Interior Assembly
Handling electronic connectors requires care to prevent bent pins.
Plug in Cable: Align the colored edges of the data cable connector to the port on the interior body. Press until it clicks.
Position Turnpiece: Turn the interior thumbturn vertical if your latch is retracted, or horizontal if extended.
Tuck Excess Wire: Gather any loose wire into the internal hollow space of the door or assembly housing.
Anchor the Body: Slide the interior assembly onto the mounting plate. Secure it using the small structural screws. Step 4: System Initialization and Handing
The lock needs to learn which direction your door swings to operate correctly.
Load Batteries: Insert four high-quality AA alkaline batteries into the battery compartment.
Automatic Orientation: Keep the door open during this step. The lock will automatically extend and retract the bolt.
Check Status LED: A green light flash indicates successful door-handing detection. A red light means checking latch alignment is required.
Replace Cover: Slide the plastic battery cover back over the interior assembly. Step 5: Digital Setup and App Pairing
Finalize your installation by connecting the hardware to your smartphone.
Download App: Search for the official ExLock app in the Apple App Store or Google Play Store.
Create Account: Open the app and register a new user profile using a valid email address.
Add New Device: Tap the “+” icon in the top right corner of the app dashboard.
Trigger Pairing Mode: Press and hold the reset button on the lock interior for 5 seconds until it beeps.
Complete Sync: Follow the on-screen prompts to pair via Bluetooth, connect to Wi-Fi, and set your master PIN code. To help tailor this guide further, please share:
The exact model number of your ExLock system (e.g., ExLock Pro, ExLock Touch).
Whether you are mounting it on a wood, metal, or glass door.
The smart home ecosystem you plan to connect it to (Apple Home, Google Home, Alexa).
Leave a Reply